In most toolboxes there is a wire stripper and it may be the case that you do not identify it or do not know what to use it for. Until today. Discover all its utilities.

And it is a shame, because it can be very useful not only for the function that gives it its name but also for other domestic tasks.

Although as the name implies, this tool is basically used to strip wires. It is also known as stripping tongs and can be used to do other DIY work.

What else can a wire stripper be used for?

There are multiple uses of the wire stripper detail below

  1. As compression clamps for two metal parts to make contact.
  2. To compress small objects such as the fins of different accessories.
  3. For specific jobs such as cutting nails, cutting screws, some small parts and even sheets.

Obviously, all this depends on the type of wire stripper you have, since some are basic and only allow you to perform the main task, but if it is a more sophisticated one, it has a greater hardness to give it any other type of use.

Keep in mind that whenever you work with components of electricity you have to cut the light and take the maximum possible precaution. In addition, it is also advisable, before putting into practice the different uses of the Best wire strippers, that the tool is in perfect condition and that it can be used for the purpose you want.

What is pliers to strip?

A wire stripper is a manual tool used to strip the sections of the ends of electrical wires. The main objective of a wire stripper is to cut the insulation or the sheath without cutting or damaging the conductor. Whether it is for computer cabling or for wires intended for electrical networks, buying stripping pliers is always better for this job.

There are simple or manual pliers, which allow you to strip the wires by first cutting the sheath and removing it manually. Others called automatic stripping pliers make it possible to cut and remove the sheath in a single maneuver and still other allow the sheath to be cut simultaneously from both ends of the electrical wires. Now let’s see how you strip an electrical wire.

How to strip a wire?

To strip a wire, take your pliers, insert the end of the wire to be stripped (make sure to respect the correct length of wire to be cut). Press the sleeves to tighten the insulation (of course you will have to adapt the clamp to the diameter of the wire beforehand) and while maintaining the pressure, rotate, the sheath will be sectioned and you will just have to pull to remove it.

The principle of use explained above is that of simple pliers. For automatic and self-adjusting pliers, simply introduce the end of the wire to be cut into the pliers and in a single operation or pressure, the wire is stripped.

What are the prices of wire strippers?

The prices of pliers vary between 7 and 26 euros generally. It’s up to you to choose the model that’s right for you, given your goals and budget. Keep in mind that the more options and functions your stripper has, the higher the purchase price.

Generally considering the good quality and the resistance of the materials of manufacture (steel, rubber, plastic or rubber) the pliers whatever the model are often guaranteed for life. Another good reason to get it!

What are the differences between the different types?

Like other types of pliers, the classic wire stripper consists of three essential elements: the handle, an articulated connection and the pliers head. When designing the handle, as usual, you can choose between models with a simple plastic cover and a multi-component handle. On the one hand, handles made of several components are very comfortable because the soft zones adapt well to the hand and protect them at work. On the other hand, they are not quite as compact as those that are simply covered with plastic. These lie comfortably in the hand, can easily be stored in a tool case or a bag and are completely sufficient for occasional use.

In most models, the pliers joint is either an on-hook, with the two halves crossing over one another. Or it is an inlaid joint in which the halves are designed so that they fit into each other. In many models, an opening spring ensures that the pliers are automatically returned to their original position after being actuated.

The classic wire stripper is a front cutter because the cable sheath is easiest cut from the front and pulled off the core. For this reason, the pliers head does not have cutting edges that lie continuously on top of each other, but rather round or V-shaped openings, the width of which can usually be adjusted. The set screw used for this is usually incorporated into one of the two jaws. It can be used to reduce or enlarge the opening in order to adjust the pliers to the respective cable cross-section so that only the insulation and not the internal conductor is cut.